Fair_Processing_Notice_V6.0521
As the name hints the Very Narrow Aisle or Man-Up vehicle is used in instances where space is at a premium. They raise the operator along with the load platform to provide direct access to stored inventory for small parts, case and full pallet picking.
Machine: Very Narrow Aisle (Operator Up)
Category: F1
Specification: Operator Up
Accrediting Body: RTITB accredited or non accredited
Ratio: 3 : 1 : 1 (3 operators, 1 instructor, 1 machine)
Training Methods:
Classroom/Practical and use of at height training device. During the practical application the Trainer will assess safety, competence and aptitude, followed by a multiple choice written test with discussion.
Our training is undertaken in a relaxed and friendly manner with safety as our main priority : All of our training is carried out by certified S-Cape Instructors
The following list is the elements that make up a novice very narrow aisle (operator up) course. For experienced operators, safety refresher and conversion courses the list would be shorter.
* To be covered where relevant to operation or facilities permit
JWT follows the industries accredited bodies recommended time scales to ensure that you receive training of the highest standard.
VNA / Man-Up |
Up to 3 People |
| Novice |
3-5 Days |
| Experienced |
1-3 Days |
| Refresher |
1 Day |
| Conversion |
The total S-Cape Evacuation System is an emergency evacuation unit based on the abseiling principle using the proven S-Cape Kit when all other means of escape have been exhausted.
Intended for: Operators of VNA’s (Man Up) & High Level Order Pickers (HLOP’s) in a warehouse environment.
Course Aim: This course is designed to give adequate knowledge to participants in the use of the S-Cape Personal Evacuation System.
Training Methods:
Classroom/Practical and use of at height training device. During the practical application the Trainer will assess safety, competence and aptitude, followed by a multiple choice written test with discussion.
Our training is undertaken in a relaxed and friendly manner with safety as our main priority : All of our training is carried out by certified S-Cape Instructors
Learning Outcomes: On successful completion personnel are certified to use the S-Cape operation units in accordance with the manufacturer’s instructions and recommendations for a period of 12 months.
Course Duration: 4 Hours
Certification Duration: Valid for a maximum of 1 year.
Training on Site at Clients Premises:
What is needed: Designated use of equipment for evacuation (VNA / Order picker), Classroom, Safe area to train,comfortable clothing and safety shoes (warm clothing during winter months) gloves (optional)
Safety Equipment: The S-Cape training kit, harness, hard hats & safety line will be supplied by the instructor to ensure the trainee’s feel comfortable and safe.
Entry Requirements: Able to undertake practical elements at height.
Pre-Training Requirements: A valid VNA or Order picker operator’s certificate of training (license).
Delegate Requirements:
JWT follows the industries accredited bodies recommended time scales to ensure that you receive training of the highest standard.
S-Cape Training |
Up to 3 People |
| Duration |
4 Hours |
The Pivot Steer is commonly refereed to as a “bendi” or “flexi” lift truck. They are a cross between a counterbalance and reach lift trucks. Their unique design allows the mast to swing 90° to either side meaning that this type of lift truck works in the narrowest isles, the highest racking bays and the most demanding multi shift operations. Known as an “Articulated Forklift” they are versatile and a multi purpose machine. They allow you to unload in your yard and then do the work of narrow isle fork lifts e.g. Reach eliminating the need for additional machines.
Delivered through a range of training mediums including Powerpoint, films and other interaction methods, the course will cover the following areas:
Theory:
Need to train
H&S at Work Etc Act 1974 / PUWER; LOLER regulations 1998
Principles of Counterbalance
Load Assessment
Rated Capacity / Load Centres
Truck & Load Stability / Instability
Refuelling / Battery Charging / Maintenance
Hydraulic System & Controls
Industrial Racking Systems
Loading / Unloading
Operators Safety Code
Practical:
Pre Use Inspection
Controls & Instruments
Operation of the Hydraulic Controls
Elementary Driving /Stopping / Parking
Basic / Accurate Steering (Chicane / Confined Spaces / Working isles)
Handling Palletised Loads
Stacking; de-stacking Low / Eye; High Level (Industrial Racking & otherwise)
Bulk Stacking (if applicable)
Tests:
Pre Use Inspection
Knowledge Test
Practical Driving Assessment:
All courses are designated to provide the operator with the basic skills and knowledge to drive safely and efficiently whilst being mindful of hazards, injury and damage to goods. Furthermore, courses are carried out in accordance with industry ACOP (Approved Code of Practices) and in accordance with Health & Safety Executive (HSE)
This training is available to delegates who are at various levels and may be
categorised as:
– Novices
– Refreshers
– Experienced
– Conversion
The time for each course depends on the delegates ability and level at which they are at. JWT follows the industries accredited bodies recommended time scales to ensure that you receive training of the highest standard. The course duration generally are
accepted as outlined in the following table:
Pivot Forklift |
Up to 3 People* |
| Novice Course Training: Never driven a Forklift previously |
3-5 Days |
| Refresher Training: Already operating a Forklift on a regular basis |
1 Day |
| Conversion Training: Already hold a valid Forklift for a different type |
2 Days |
| Experienced Training: Operate a Forklift truck on a regular basis but without any previous formal training |
2-3 Days |
*All Trainee’s MUST be of a similar ability / level)
On successful completion of this theoretical and practical training course trainees will be able to operate the machine safely and skilfully. They will have practiced manoeuvring the machine in confined areas, stacked and de-stacked at various levels and will have been instructed in pre-shift inspection and refuelling procedures.
The Company will be issued with Certification for all successful candidates.
The Manual handling course will explain the inherent dangers of moving and handling, but more importantly it will show you how to perform the task with a minimum of risk as possible to keep you safe.
A one day course providing you with the knowledge to help ensure that the employee’s perform their duties effectively and with great care.
There are no prerequisites to enrol on this course.
Assessment
The Manual Handling training course includes an end of course written assessment, containing multiple choice questions.
All courses are designated to provide the operator with the basic skills and knowledge to operate safely and efficiently whilst being mindful of hazards, injury and damage to goods. Furthermore, courses are carried out in accordance with industry ACOP (Approved Code of Practices) and in accordance with Health & Safety Executive (HSE)
JWT follows the industries accredited bodies recommended time scales to ensure that you receive training of the highest standard. The course duration generally are
accepted as outlined in the following table:
Fire Safety is an important subject in modern society as it can affect every private, public and residential sector in the U.K. As part of the Fire Safety regulations, all employees and employers must be trained in emergency fire procedures.
This course will ensure you and your employees know the correct safety precautions to follow should a fire break out.
Assessment.
The Fire Safety Awareness course contains a short question paper to test the attendees knowledge and understanding of the areas covered
Equipping your staff with basic fire safety knowledge comes highly recommended. Workplace fires are among the most serious of incidents and can be life-threatening. This course will help staff to react to such an incident
There are no prerequisites to join on this course.
This course is designed to equip attendees with the knowledge and competence to assess risks and implement suitable control measures to minimise them.
Fire Safety |
Up to 3 People* |
| Course length |
1 Day |
Asbestos Awareness training is a legal obligation for employers where there is a risk that employees may be in contact with the substance.
Whether you are a general maintenance worker, plumber, electrician, carpenter, painter, shopfitter or general construction operative; wherever asbestos may be disturbed asbestos awareness training is an absolute requirement.
Assessment
Short question paper to test the attendees knowledge and understanding of the topics covered.
This awareness course is aimed to make candidates aware of the dangers associated with exposure to asbestos and coming into contact with asbestos materials.
It will also provide the trainee’s with the knowledge required to identify where asbestos may be a risk by being able to identify where they are like to come in to contact with asbestos-containing materials, how to identify materials potentially containing asbestos and what to do should they suspect they are at risk of being exposed to asbestos.
Asbestos Awareness |
Up to 3 People* |
| Course length |
1 Day |
Since the implementation of the Working at Heights regulations in 2005, all companies that employ people who may work at heights, have a responsibility to ensure that their staff are aware of the risks that come with such work, and how to manage them. In most cases where work is required to be carried out at height, the use of a harness will also be required.
A one-day training programme that will help to fulfil the requirements of your organisation under health and safety regulation and safeguard employees. Each member of the workforce required to work at height, should also receive training in how to effectively and safely perform their duties. This course is designed as a safe introduction to working at heights and the common hazards and risks associated with such work.
Assessment.
The tutor will assess you through a short multiple-choice assessment paper at the end of the course.
There are no prerequisites to join on this course.
This course is designed to equip attendees with the knowledge and competence to assess these risks and implement suitable control measures to minimise them.
By the end of the course, attendees will:
Harness Training |
Up to 3 People* |
| Course length |
1 Day |
This Abrasive Wheels Awareness course raises awareness of the dangers associated with abrasive wheels and the practical steps that can be taken to minimise and control the risks that they present.
This course is suitable for anyone who uses abrasive wheels in their work activities. The course is particularly relevant for those who use bench grinders, pedestal grinders and angle grinders.
Legislation and guidance applicable to abrasive wheels
Common hazards associated with abrasive wheels, including:
Selecting and handling abrasive wheels, including:
Safe use of abrasive wheels (cut-off saws and angle grinders) when:
Use of personal protective equipment (PPE) and respiratory protective equipment (RPE)
Control of the risks posed by dust
Assessment
The Abrasive Wheels Awareness training course includes an end of course test.
This course has been written at an introductory level and no pre-requisite training is required. The training is ideal for people working in positions such as, but not limited to:
Engineer
Builder / Floor Layer / Bricklayer
Electrician
Carpenter / Joiner / Fitter
Site / Project Manager
Welder
JWT follows the industries accredited bodies recommended time scales to ensure that you receive training of the highest standard. The course duration generally are
accepted as outlined in the following table:
Abrassive Wheels |
Up to 3 People* |
|
? Days |
|
|
|
|
|
|
|
The Overhead Crane operator training course instructs persons in the use of pendant control overhead cranes in workshops, warehouse and manufacturing environments. We provide the knowledge and skills necessary for safe operation of overhead travelling cranes.
This course is aimed to make candidates aware of the dangers associated with overhead cranes and show them the correct and safest way to operate in accordance with operators safety code, law & legislation.
Delivered through a range of training mediums including Powerpoint, films and other interaction methods, the course will cover the following areas:
– Legislation of Lifting equipment and attachments
– Pre-start checks
– Operational checks
– Safe systems of work
– Operating crane with various loads in good & restricted areas
– Correct shutdown procedures
– Correct slinging techniques
– Load estimation
– Calculation of angles and tensions
– Lifting gear pre-use checks
– Procedures for dealing with damaged or faulty equipment
– Emergency procedures
Assessment:
The course will involve a practical test to assess the trainee’s ability to operate an overhead crane safely and correctly. In addition, there will be a short theory question paper testing the trainee’s knowledge and understanding.
All courses are designated to provide the operator with the basic skills and knowledge to operate safely and efficiently whilst being mindful of hazards, injury and damage to goods. Furthermore, courses are carried out in accordance with industry ACOP (Approved Code of Practices) and in accordance with Health & Safety Executive (HSE)
This training is available to delegates who are at various levels and may be
categorised as:
– Novices
– Refreshers
– Experienced
– Conversion
The time for each course depends on the delegates ability and level at which they are at. JWT follows the industries accredited bodies recommended time scales to ensure that you receive training of the highest standard. The course duration generally are
accepted as outlined in the following table:
Overhead Crane |
Up to 3 People* |
| Novice Course Training: Never driven a Forklift previously |
3-5 Days |
| Refresher Training: Already operating a Forklift on a regular basis |
1 Day |
| Conversion Training: Already hold a valid Forklift for a different type |
2 Days |
| Experienced Training: Operate a Forklift truck on a regular basis but without any previous formal training |
2-3 Days |
*All Trainee’s MUST be of a similar ability / level)
On successful completion of this theoretical and practical training course trainees will be able to operate the machine safely and skilfully. They will have practiced manoeuvring the machine in confined areas, stacked and de-stacked at various levels and will have been instructed in pre-shift inspection and refuelling procedures.
The Company will be issued with Certification for all successful candidates.
The Scissor Lift (MEWP 3A) course provide delegates with the knowledge and practical skills to safely operate powered access equipment through practical training session and assessment.
This course is designed for managers, supervisors and operatives who may need to use or control powered access equipment in a work environment and aims to provide delegates with a thorough understanding of the need for safety associated with powered access equipment.
Delivered through a range of training mediums including Powerpoint, films and other interaction methods, the course will cover the following areas:
– Introduction and pre-course theory test
– Health & Safety legislation
– MEWP regulations and guidance
– Operator Responsibilities & safe operating guidelines
– Machine types and use
– Structural parts
– Machine familiarisation and pre-use inspection
– Safe operating methods and hazards
– Written theory test
– Machine operating session
– Practical test
Assessment:
A practical test to assess the trainee’s safe operation of the machine and a short theory question paper testing their knowledge and understanding.
This training is available to delegates who are at various levels and may be
categorised as:
– Novices
– Refreshers
– Experienced
– Conversion
The time for each course depends on the delegates ability and level at which they are at. JWT follows the industries accredited bodies recommended time scales to ensure that you receive training of the highest standard. The course duration generally are
accepted as outlined in the following table:
MEWP 3a (Scissor Lift) |
Up to 3 People* |
| Novice Course Training: Never driven a Forklift previously |
3-5 Days |
| Refresher Training: Already operating a Forklift on a regular basis |
1 Day |
| Conversion Training: Already hold a valid Forklift for a different type |
2 Days |
| Experienced Training: Operate a Forklift truck on a regular basis but without any previous formal training |
2-3 Days |
*All Trainee’s MUST be of a similar ability / level)
On successful completion of this theoretical and practical training course trainees will be able to operate the machine safely and skilfully. They will have practiced manoeuvring the machine in confined areas, stacked and de-stacked at various levels and will have been instructed in pre-shift inspection and refuelling procedures.
The Company will be issued with Certification for all successful candidates.
The Cherry Picker (MEWP 3B) course provide delegates with the knowledge and practical skills to safely operate powered access equipment through practical training session and assessment.
This course is designed for managers, supervisors and operatives who may need to use or control powered access equipment in a work environment and aims to provide delegates with a thorough understanding of the need for safety associated with powered access equipment.
Delivered through a range of training mediums including Powerpoint, films and other interaction methods, the course will cover the following areas:
– Introduction and pre-course theory test
– Health & Safety legislation
– MEWP regulations and guidance
– Operator Responsibilities & safe operating guidelines
– Machine types and use
– Structural parts
– Machine familiarisation and pre-use inspection
– Safe operating methods and hazards
– Written theory test
– Machine operating session
– Practical test
Assessment:
A practical test to assess the trainee’s safe operation of the machine and a short theory question paper testing their knowledge and understanding.
All courses are designated to provide the operator with the basic skills and knowledge to operate safely and efficiently whilst being mindful of hazards, injury and damage to goods. Furthermore, courses are carried out in accordance with industry ACOP (Approved Code of Practices) and in accordance with Health & Safety Executive (HSE)
This training is available to delegates who are at various levels and may be
categorised as:
– Novices
– Refreshers
– Experienced
– Conversion
The time for each course depends on the delegates ability and level at which they are at. JWT follows the industries accredited bodies recommended time scales to ensure that you receive training of the highest standard. The course duration generally are
accepted as outlined in the following table:
MEWP 3B (Cherry Picker) |
Up to 3 People* |
| Novice Course Training: Never driven a Forklift previously |
3-5 Days |
| Refresher Training: Already operating a Forklift on a regular basis |
1 Day |
| Conversion Training: Already hold a valid Forklift for a different type |
2 Days |
| Experienced Training: Operate a Forklift truck on a regular basis but without any previous formal training |
2-3 Days |
*All Trainee’s MUST be of a similar ability / level)
On successful completion of this theoretical and practical training course trainees will be able to operate the machine safely and skilfully. They will have practiced manoeuvring the machine in confined areas, stacked and de-stacked at various levels and will have been instructed in pre-shift inspection and refuelling procedures.
The Company will be issued with Certification for all successful candidates.
Gets it’s name from being able to “reach” beyond points of a counterbalance lift truck. They use stabilising legs rather than a counterbalance weight to give them essential flexibility of movement. A notable difference is that the operator sits sideways on.
Reach lift trucks are usually chosen for jobs that require lifting to greater heights (10M+) and are usually used indoors on even surfaces due to their low undercarriage. This makes them ideal for reaching out into racking, to great heights and in tight working environments.
Delivered through a range of training mediums including Powerpoint, films and other interaction methods, the course will cover the following areas
Theory:
Need to train
H&S at Work Etc Act 1974 / PUWER; LOLER regulations 1998
Principles of Counterbalance
Load Assessment
Rated Capacity / Load Centres
Truck & Load Stability / Instability
Refuelling / Battery Charging / Maintenance
Hydraulic System & Controls
Industrial Racking Systems
Loading / Unloading
Operators Safety Code
Practical:
Pre Use Inspection
Controls & Instruments
Operation of the Hydraulic Controls
Elementary Driving /Stopping / Parking
Basic / Accurate Steering (Chicane / Confined Spaces / Working isles)
Handling Palletised Loads
Stacking; de-stacking Low / Eye; High Level (Industrial Racking & otherwise)
Bulk Stacking (if applicable)
Tests:
Pre Use Inspection
Knowledge Test
Practical Driving Assessment:
All courses are designated to provide the operator with the basic skills and knowledge to drive safely and efficiently whilst being mindful of hazards, injury and damage to goods. Furthermore, courses are carried out in accordance with industry ACOP (Approved Code of Practices) and in accordance with Health & Safety Executive (HSE)
This training is available to delegates who are at various levels and may be
categorised as:
– Novices
– Refreshers
– Experienced
– Conversion
The time for each course depends on the delegates ability and level at which they are at. JWT follows the industries accredited bodies recommended time scales to ensure that you receive training of the highest standard. The course duration generally are
accepted as outlined in the following table:
Reach Forklift Truck |
Up to 3 People* |
| Novice Course Training: Never driven a Forklift previously |
3-5 Days |
| Refresher Training: Already operating a Forklift on a regular basis |
1 Day |
| Conversion Training: Already hold a valid Forklift for a different type |
2 Days |
| Experienced Training: Operate a Forklift truck on a regular basis but without any previous formal training |
2-3 Days |
*All Trainee’s MUST be of a similar ability / level)
On successful completion of this theoretical and practical training course trainees will be able to operate the machine safely and skilfully. They will have practiced manoeuvring the machine in confined areas, stacked and de-stacked at various levels and will have been instructed in pre-shift inspection and refuelling procedures.
The Company will be issued with Certification for all successful candidates.
These come in a variety of designs. They can be rider operated via a fixed or hinged platform or pedestrian walk along. They are easy to operate and manoeuvre in tight spaces such as a lorry trailer. They normally only lift to a low height 12” and are designed to move pallet loads around whilst removing the manual handling for the operator.
Delivered through a range of training mediums including Powerpoint, films and other interaction methods, the course will cover the following areas:
Theory:
Need to train
H&S at Work Etc Act 1974 / PUWER; LOLER regulations 1998
Principles of Counterbalance
Load Assessment
Rated Capacity / Load Centres
Truck & Load Stability / Instability
Refuelling / Battery Charging / Maintenance
Hydraulic System & Controls
Industrial Racking Systems
Loading / Unloading
Operators Safety Code
Practical:
Pre Use Inspection
Controls & Instruments
Operation of the Hydraulic Controls
Elementary Driving /Stopping / Parking
Basic / Accurate Steering (Chicane / Confined Spaces / Working isles)
Handling Palletised Loads
Stacking; de-stacking Low / Eye; High Level (Industrial Racking & otherwise)
Bulk Stacking (if applicable)
Tests:
Pre Use Inspection
Knowledge Test
Practical Driving Assessment:
All courses are designated to provide the operator with the basic skills and knowledge to drive safely and efficiently whilst being mindful of hazards, injury and damage to goods. Furthermore, courses are carried out in accordance with industry ACOP (Approved Code of Practices) and in accordance with Health & Safety Executive (HSE)
This training is available to delegates who are at various levels and may be
categorised as:
– Novices
– Refreshers
– Experienced
– Conversion
The time for each course depends on the delegates ability and level at which they are at. JWT follows the industries accredited bodies recommended time scales to ensure that you receive training of the highest standard. The course duration generally are
accepted as outlined in the following table:
Powered Pedestrian Truck |
Up to 3 People* |
| Novice Course Training: Never driven a Forklift previously |
3-5 Days |
| Refresher Training: Already operating a Forklift on a regular basis |
1 Day |
| Conversion Training: Already hold a valid Forklift for a different type |
2 Days |
| Experienced Training: Operate a Forklift truck on a regular basis but without any previous formal training |
2-3 Days |
*All Trainee’s MUST be of a similar ability / level)
On successful completion of this theoretical and practical training course trainees will be able to operate the machine safely and skilfully. They will have practiced manoeuvring the machine in confined areas, stacked and de-stacked at various levels and will have been instructed in pre-shift inspection and refuelling procedures.
The Company will be issued with Certification for all successful candidates.
Again these come in a wide range from manual, semi and fully powered. Pallet stackers enable operators to carry out the same activities as standard pedestrian pallet trucks but with the additional capability of stacking and de-stacking goods at height. These are often used as a smaller cheaper and more convenient alternative to fork lift trucks.
Delivered through a range of training mediums including Powerpoint, films and other interaction methods, the course will cover the following areas:
Theory:
Need to train
H&S at Work Etc Act 1974 / PUWER; LOLER regulations 1998
Principles of Counterbalance
Load Assessment
Rated Capacity / Load Centres
Truck & Load Stability / Instability
Refuelling / Battery Charging / Maintenance
Hydraulic System & Controls
Industrial Racking Systems
Loading / Unloading
Operators Safety Code
Practical:
Pre Use Inspection
Controls & Instruments
Operation of the Hydraulic Controls
Elementary Driving /Stopping / Parking
Basic / Accurate Steering (Chicane / Confined Spaces / Working isles)
Handling Palletised Loads
Stacking; de-stacking Low / Eye; High Level (Industrial Racking & otherwise)
Bulk Stacking (if applicable)
Tests:
Pre Use Inspection
Knowledge Test
Practical Driving Assessment:
All courses are designated to provide the operator with the basic skills and knowledge to drive safely and efficiently whilst being mindful of hazards, injury and damage to goods. Furthermore, courses are carried out in accordance with industry ACOP (Approved Code of Practices) and in accordance with Health & Safety Executive (HSE)
This training is available to delegates who are at various levels and may be
categorised as:
– Novices
– Refreshers
– Experienced
– Conversion
The time for each course depends on the delegates ability and level at which they are at. JWT follows the industries accredited bodies recommended time scales to ensure that you receive training of the highest standard. The course duration generally are
accepted as outlined in the following table:
Pedestrian Pallet Stacker |
Up to 3 People* |
| Novice Course Training: Never driven a Forklift previously |
3-5 Days |
| Refresher Training: Already operating a Forklift on a regular basis |
1 Day |
| Conversion Training: Already hold a valid Forklift for a different type |
2 Days |
| Experienced Training: Operate a Forklift truck on a regular basis but without any previous formal training |
2-3 Days |
*All Trainee’s MUST be of a similar ability / level)
On successful completion of this theoretical and practical training course trainees will be able to operate the machine safely and skilfully. They will have practiced manoeuvring the machine in confined areas, stacked and de-stacked at various levels and will have been instructed in pre-shift inspection and refuelling procedures.
The Company will be issued with Certification for all successful candidates.
Typically found in busy distribution centres they like the PPT are designed to improve the efficiency and productivity operating at ground level whilst removing some of the manual handling for the operator. As the name suggests there are a piece of equipment to assist with the transportation whilst picking orders. These are operated by standing in a forward facing direction and using the controls to drive the truck whilst the forks trail behinds carrying the pallets with the goods on.
Delivered through a range of training mediums including Powerpoint, films and other interaction methods, the course will cover the following areas:
Theory:
Need to train
H&S at Work Etc Act 1974 / PUWER; LOLER regulations 1998
Principles of Counterbalance
Load Assessment
Rated Capacity / Load Centres
Truck & Load Stability / Instability
Refuelling / Battery Charging / Maintenance
Hydraulic System & Controls
Industrial Racking Systems
Loading / Unloading
Operators Safety Code
Practical:
Pre Use Inspection
Controls & Instruments
Operation of the Hydraulic Controls
Elementary Driving /Stopping / Parking
Basic / Accurate Steering (Chicane / Confined Spaces / Working isles)
Handling Palletised Loads
Stacking; de-stacking Low / Eye; High Level (Industrial Racking & otherwise)
Bulk Stacking (if applicable)
Tests:
Pre Use Inspection
Knowledge Test
Practical Driving Assessment:
All courses are designated to provide the operator with the basic skills and knowledge to drive safely and efficiently whilst being mindful of hazards, injury and damage to goods. Furthermore, courses are carried out in accordance with industry ACOP (Approved Code of Practices) and in accordance with Health & Safety Executive (HSE)
This training is available to delegates who are at various levels and may be
categorised as:
– Novices
– Refreshers
– Experienced
– Conversion
The time for each course depends on the delegates ability and level at which they are at. JWT follows the industries accredited bodies recommended time scales to ensure that you receive training of the highest standard. The course duration generally are
accepted as outlined in the following table:
Order Picker |
Up to 3 People* |
| Novice Course Training: Never driven a Forklift previously |
3-5 Days |
| Refresher Training: Already operating a Forklift on a regular basis |
1 Day |
| Conversion Training: Already hold a valid Forklift for a different type |
2 Days |
| Experienced Training: Operate a Forklift truck on a regular basis but without any previous formal training |
2-3 Days |
*All Trainee’s MUST be of a similar ability / level)
On successful completion of this theoretical and practical training course trainees will be able to operate the machine safely and skilfully. They will have practiced manoeuvring the machine in confined areas, stacked and de-stacked at various levels and will have been instructed in pre-shift inspection and refuelling procedures.
The Company will be issued with Certification for all successful candidates.
The most common forklift truck (FLT) in the workplace. Called counterbalance because of the weight in the rear of the vehicle that compensates for the load being lifted at the front.
They can be 3 or 4 wheeled trucks and also there are Electric, Diesel and Gas Options. The compact design makes them ideal for getting up close and picking up heavy loads to allow fundamental work of lifting, moving and placing items between HGV’s and storage space.
Delivered through a range of training mediums including Powerpoint, films and other interaction methods, the course will cover the following areas:
Theory:
Need to train
H&S at Work Etc Act 1974 / PUWER; LOLER regulations 1998
Principles of Counterbalance
Load Assessment
Rated Capacity / Load Centres
Truck & Load Stability / Instability
Refuelling / Battery Charging / Maintenance
Hydraulic System & Controls
Industrial Racking Systems
Loading / Unloading
Operators Safety Code
Practical:
Pre Use Inspection
Controls & Instruments
Operation of the Hydraulic Controls
Elementary Driving /Stopping / Parking
Basic / Accurate Steering (Chicane / Confined Spaces / Working isles)
Handling Palletised Loads
Stacking; de-stacking Low / Eye; High Level (Industrial Racking & otherwise)
Bulk Stacking (if applicable)
Tests:
Pre Use Inspection
Knowledge Test
Practical Driving Assessment:
All courses are designated to provide the operator with the basic skills and knowledge to drive safely and efficiently whilst being mindful of hazards, injury and damage to goods. Furthermore, courses are carried out in accordance with industry ACOP (Approved Code of Practices) and in accordance with Health & Safety Executive (HSE)
This training is available to delegates who are at various levels and may be
categorised as:
– Novices
– Refreshers
– Experienced
– Conversion
The time for each course depends on the delegates ability and level at which they are at. JWT follows the industries accredited bodies recommended time scales to ensure that you receive training of the highest standard. The course duration generally are
accepted as outlined in the following table:
Counterbalance Forklift Truck |
Up to 3 People* |
| Novice Course Training: Never driven a Forklift previously |
3-5 Days |
| Refresher Training: Already operating a Forklift on a regular basis |
1 Day |
| Conversion Training: Already hold a valid Forklift for a different type |
2 Days |
| Experienced Training: Operate a Forklift truck on a regular basis but without any previous formal training |
2-3 Days |
*All Trainee’s MUST be of a similar ability / level)
On successful completion of this theoretical and practical training course trainees will be able to operate the machine safely and skilfully. They will have practiced manoeuvring the machine in confined areas, stacked and de-stacked at various levels and will have been instructed in pre-shift inspection and refuelling procedures.
The Company will be issued with Certification for all successful candidates.